Tafelkleed en wenskaart met harten

#v13039

Een tafelkleed en wenskaart met harten. Het stempel motieven vel met de kleine harten is bevestigd op het Fiskars stempel wiel. De rand op het tafelkleed is gemaakt door het stempel wiel over het kleed te rollen. De wenskaart is gedecoreerd door het stempel wiel over een sjabloon te rollen, dat uitgesneden is met de shape cutter.

#v13039
Selecteer producten bij dit idee

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Totale prijs
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Hoe werkt het
Guide step %d
1.   Remove the two protective sheets from the silicone stamp design.
Guide step %d
2.   Open and remove the roller by pulling out the two orange pins. Attach the stamp design onto by wrapping it around the roller and fasten it onto the small tabs in the other end.
Guide step %d
3.   Push in the two orange pins and put the roller back in the holder. There must be an audible click indicating that it is now in place.
Guide step %d
4.   Push the ink pad in place at the top of the holder with the tabs in the grooves.
Guide step %d
5.   Roll the border onto the table cloth. You make the stamp printing by pushing the roller forwards in a smooth motion. NB! Draw a thin line with a pencil to keep a straight margin.
Guide step %d
6.   For the greeting card make a heart from card using a template. Cut it out using a shape cutter plus.
Guide step %d
7.   Place the cut-out heart template on the outside front of the greeting card (if light-coloured). Or, as here – on a white piece of card, and roll the stamp across. First vertically and then a second one, letting the stamping wheel slightly overlapping the first print. NB! You may choose to make a sample beforehand.
Guide step %d
8.   Remove the heart template. A heart motif consisting of lots of small hearts inside, is revealed.
Guide step %d
9.   Trim the white card with the printed heart, making it slightly smaller than the greeting card on which the white card is going to be attached. Use a border punch along one side of the white card.
Guide step %d
10.   Attach the white card onto the greeting card using double-sided adhesive tape.
Guide step %d
11.   Make a hole in the card and tie a piece of cotton cord around the card.
Guide step %d
12.   Use a lever punch for punching out small hearts. We have used four for the card.
Guide step %d
13.   Attach the hearts in pairs around each cotton cord end. Use double-sided adhesive tape.
Al aangemeld? Download de sjabloon
Copyright © Creativ Company | 2021-present