Ketting met kralen van hars, steen en glas

#v13216

Deze ketting is gemaakt van een stukje zilverkleurig jasseron. Kralen van hars, steen en glas zijn bevestigd aan de zilverkleurige jasseron. De kralen zijn geketteld op nietstiften en in secties verdeeld.

#v13216
Selecteer producten bij dit idee

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Totale prijs
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Hoe werkt het
Guide step %d
1.   Put two beads onto an eye pin. Cut off the excess eye pin at approx. 8mm from the bead using side cutters. Bend the end of the eye pin backwards.
Guide step %d
2.   Make a loop with round nose pliers. Put another eye pin and another bead onto this eye pin before closing the loop completely. NB: We have used silver eye pins as they are thinner and therefore suitable for beads with small holes. You can therefore take advantage of the cut-off pieces of silver eye pins by saving them for new pins for other purposes.
Guide step %d
3.   Put a flower-shaped resin bead onto the next eye pin. Shorten the eye pin in the same way as previously described and make a new loop. Insert another eye pin in this newly formed loop. Put a jade bead onto this eye pin.
Guide step %d
4.   Cut off the eye pin (with the jade bead) approx. 2cm from the bead, leaving the eye pin long enough for making a double loop with round nose pliers.
Guide step %d
5.   Insert two eye pins in the double loop and put a small bead on each of the two eye pins. Make a loop on each of the eye pins and continue this procedure with beads on eye pins until there are five sections in each side with a bead on an eye pin.
Guide step %d
6.   Attach a piece of silver chain in your desired length onto each of the last loops on the 2 x 5 connected sections. NB: The necklace must be long enough to fit over the head as no clasp will be fitted.
Al aangemeld? Download de sjabloon
Copyright © Creativ Company | 2021-present