Een kerstkelfen muts

#v1459

Een kerstelfen muts gemaakt door Merino wol te natvilten m.b.v. een sjabloon.

Selecteer producten bij dit idee

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Totale prijs
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1.   You will need approx. 60 g Merino Wool for the hat: 20 g dark red and 40 g Christmas red. Divide the wool in two - a pile on each side of the hat. Now divide again the Christmas red Merino Wool in two. Place wads of Christmas red Merino Wool over the template as a base covering the template. Place the wool so it also goes over the edges of the template. The wads of wool should be torn apart – never cut. Place the wads of wool staggered in the same direction.
Guide step %d
2.   Place dark red Merino Wool as the next layer, but across the first layer.
Guide step %d
3.   Now place another layer of Christmas red Merino Wool across the dark red Merino Wool. Now the template is covered by three layers of Merino Wool.
Guide step %d
4.   Moisten the wool with a spray bottle containing water and soap. The edge must remain dry. Squeeze the water together with the wool and felt a little (making circular movements).
Guide step %d
5.   Place the foam rubber/bubble wrap template over the wet felt.
Guide step %d
6.   Fold the dry edges over the template.
Guide step %d
7.   Now place another three layers of Merino Wool over the template (Christmas red / dark red / Christmas red) as described above. Make it go approx. 4cm beyond the edge.
Guide step %d
8.   Moisten the wool, but leave the edges dry!
Guide step %d
9.   Turn the whole thing over.
Guide step %d
10.   Now fold in the dry edges over the template.
Guide step %d
11.   Moisten the wool and felt by hand. Make sure the edges are felted thoroughly. Continue felting until the template feels a little too big and the wool is well on the way to being felted.
Guide step %d
12.   Now cut open the base of the hat and remove the template.
Guide step %d
13.   Insert one hand into the hat. Continue felting with the other hand. You may add water/soap. Finish the felting by hand or in the tumble dryer. If using the tumble dryer, make sure to keep an eye on the hat, preventing it from suddenly becoming too small.
Guide step %d
14.   Rinse the hat free of soap (the last soap residue can be removed with a little vinegar in the last rinse water). Pull the hat into shape.
Guide step %d
15.   Dry the hat – you may put it over a blown up balloon.
Guide step %d
Template   -
Bijgevoegd bestand: Downloads
Guide step %d
Template   -
Bijgevoegd bestand: Downloads
Al aangemeld? Download de sjabloon
Terug
Ik ben aan het winkelen als
Ga verder als guest
Uw voordelen van inloggen

✔ Uw persoonlijke verlanglijstje

✔ Bestelgeschiedenis bekijken

✔ Eenvoudig afrekenen
Uw voordelen van inloggen

✔️ Speciale prijzen

✔️ Speciale B2B-producten

✔️ B2B-marketingdomein
Uw voordelen van inloggen

✔ Content speciaal voor u

✔ Speciale prijzen
Copyright © Creativ Company | 2021-present