Een palletpodium met een terrazzo look

Een palletpodium met een terrazzo look

Inspiration: 15254

Van: € 5,20

Tot: € 365,96

Prijs van het idee: € 0,00

Incl. BTW

Beschikbaarheid: Op voorraad

Van: € 5,20

Tot: € 365,96

Maak uw eigen podium op wielen van halve pallets gedecoreerd met Plus Color Acrylverf en Terrazzo-vlokken. Dit podium kan ook worden gebruikt als een salontafel bijvoorbeeld.
Guide step 1
Step 1.
Begin by putting the two half pallets together and then screw on one of the sides. The two short pallet sides measure: 60 x 45 cm and the two long sides measure 83 x 45 cm.
Guide step 2
Step 2.
Insert a screw at each end of the board approx. 2 cm from the edge. A piece of scrap wood is here used for measuring how far up the screw should be positioned so that the top will eventually be at the right height relative to the sides.
Guide step 3
Step 3.
Continue to screw the remaining sides onto the pallets as well as the screws which will support the top board.
Guide step 4
Step 4.
The podium without the top.
Guide step 5
Step 5.
Place the top board onto the screws. The measurements of the top board are 60 x 80 cm.
Guide step 6
Step 6.
Screw on the top board.
Guide step 7
Step 7.
Screw on the casters.
Guide step 8
Step 8.
The podium is now finished.
Guide step 9
Step 9.
Now paint the podium with black craft paint. Roll on decoupage lacquer on a small area at a time using a paint roller.
Guide step 10
Step 10.
Sprinkle Terrazzo flakes loosely over the wet lacquer.
Guide step 11
Step 11.
Smooth out the surface in order to flatten the flakes. Leave to dry.
Guide step 12
Step 12.
Sand the surface lightly with sand paper.
Guide step 13
Step 13.
Apply another coat of decoupage lacquer to the surface. You may apply several coats of decoupage lacquer for a smooth and durable result.

Producten kopen

Prijs van het idee: € 0,00

Incl. BTW