Dozen gedecoreerd met textiel decoupage

Dozen gedecoreerd met textiel decoupage

Inspiration: 15325

Van: € 2,48

Tot: € 327,12

Prijs van het idee: € 0,00

Incl. BTW

Beschikbaarheid: Op voorraad

Van: € 2,48

Tot: € 327,12

Deze dozen van papier-maché zijn gedecoreerd met textiel decoupage, lint en een stud van metaal.
Guide step 1
Step 1.
Measure the fabric around the sides and the base of the box.
Guide step 2
Step 2.
Apply a coat of decoupage lacquer for fabric onto the sides of the box and attach the fabric.
Guide step 3
Step 3.
Apply decoupage lacquer for fabric onto the inside of the box along the edge and fold the fabric onto the inside of the box. Alternatively trim the fabric along the edges of the box.
Guide step 4
Step 4.
Fold the edges underneath the bottom of the box.
Guide step 5
Step 5.
Attach a piece of fabric onto the bottom of the box using decoupage lacquer for fabric.
Guide step 6
Step 6.
Cut out the fabric for the box lid using the template which you may print from the PDF file attached on this page. Apply decoupage lacquer for fabric onto the lid and place either polyester stuffing/wadding on top of the box lid. Apply another coat of decoupage lacquer for fabric (also along the edges) and place (a piece of) patchwork fabric on top.
Guide step 7
Step 7.
Fold in the edges.
Guide step 8
Step 8.
Attach a piece of ribbon along the edge of the box lid using decoupage lacquer for fabric.
Guide step 9
Step 9.
Cut pieces of fabric for the round box lids using the template in the PDF file attached on this page. Apply a coat of decoupage lacquer onto the lid and place either polyester stuffing or polyester wadding on top. Apply a coat of decoupage lacquer for fabric along the edges and place a piece of patchwork fabric on top.
Guide step 10
Step 10.
Apply another coat of decoupage lacquer for fabric onto the lids and the boxes, making them dirt resistant.
Guide step 11
Step 11.
Fix a metal stud in the middle of each lid by making a hole with an awl (use a board as an underlay).
Guide step 12
Step 12.
Separate the two-part metal stud and fix it into the hole.
Guide step 13
Step 13.
Leave the box and the lid to dry completely before putting the lid on.
Template
Attached file: Download hier

Producten kopen

Prijs van het idee: € 0,00

Incl. BTW